Skip to main content

10.1

Major VersionM

by Pete Prodoehl

Introduction

Use our Robotics Board to control a servo motor with a potentiometer.

Video Overview

Featured Document

  1. Build the circuit as shown in the diagram using the components specified.
    • Build the circuit as shown in the diagram using the components specified.

    • The servo motor has wires already attached. Make note of where each color plugs in.

  2. Upload the Arduino sketch to the Robotics Board.
Finish Line

One other person completed this guide.

Pete Prodoehl

Member since: 03/04/2020

331 Reputation

298 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 9

All Time: 874