Skip to main content

10

Minor Versionm

by Joshua

Introduction

Create a fun light-up card for Father's Day. Just add an LED, a CR2032 battery, and some Maker Tape.

There's a full-color version as well as a black & white version that makes a great coloring activity.

You can make this project (and many more!) with our Paper Circuits Kit.

Featured Document

  1. In general build this project in this order: Print out the full-color card, or print out the black and white card, and color/decorate as desired. Poke holes through front for LED legs, then push legs through front.
    • In general build this project in this order:

    • Print out the full-color card, or print out the black and white card, and color/decorate as desired.

    • Poke holes through front for LED legs, then push legs through front.

    • On inside of card, bend legs down flat against paper.

    • Add Maker Tape and battery to complete your circuit.

    • Note: If you are using thicker paper (such as cardstock) we recommend using a large safety pin to poke the holes in the paper to put the LED legs through.

Conclusion

Enjoy your card!

Pete Prodoehl

Member since: 03/04/2020

281 Reputation

278 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 4

All Time: 242