Create this eye stunning acrylic Christmas Tree using a Laser Cutter and our free template along with Maker Tape.
Download the PDF file and import it into your laser cutter software of choice. Typically this would be Adobe Illustrator, Corel Draw, or Inkscape.
Make sure the 1x1 inch square is in fact 1x1 inch when you've imported it. This is your reference point. If it's not 1x1 then you need to adjust all the shapes to make them the right size.
At this point you can either cut it as is to get a clear looking tree or you can use your drawing software to add in decorations for etching.
Once cut and cleaned up, add the battery and LED into the cut out. Slip the second piece of acrylic down and over the LED. It helps to slightly bend the acrylic to the side and then over the LED.
Embed this guide
Choose a size and copy the code below to embed this guide as a small widget on your site / forum.