Skip to main content

1.4

Major VersionM

by Pete Prodoehl

Introduction

These are 3D Printed LEGO Compatible parts that make building a Gripper mechanism easy.

Check out the full guide to making your own LEGO Gripper (with 3D Printed Parts)!

Note: You may also be interested in this LEGO Technic build of our Rover Gripper.

Parts

No parts specified.

  1. You can download the files and print them on your own 3D Printer. Find them in our GitHub repository: https://github.com/BrownDogGadgets/3D-Pr... There is a full assembly guide here: LEGO Gripper (with 3D Printed Parts).
  2. Every 3D printer is a little different, and may not be as well calibrated as it should be. If you find parts a bit too loose or tight we recommend trying to print at 101%, or 102% or increasingly smaller by a percent. That may be enough to help them fit properly. Note: If you are comfortable editing OpenSCAD files we've provided the source for you to make any needed changes: https://github.com/BrownDogGadgets/3D-Pr... Note: If you are comfortable editing OpenSCAD files we've provided the source for you to make any needed changes: https://github.com/BrownDogGadgets/3D-Pr...
    • Every 3D printer is a little different, and may not be as well calibrated as it should be. If you find parts a bit too loose or tight we recommend trying to print at 101%, or 102% or increasingly smaller by a percent. That may be enough to help them fit properly.

    • Note: If you are comfortable editing OpenSCAD files we've provided the source for you to make any needed changes: https://github.com/BrownDogGadgets/3D-Pr...

Finish Line

One other person completed this guide.

Pete Prodoehl

Member since: 03/04/2020

281 Reputation

278 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 3

All Time: 209