12/13/2023 by Pete Prodoehl

Halloween Witch Card

Written By: Pete Prodoehl (and one other contributor)

Difficulty

Very easy

Steps

Time Required

00:10:00 - 00:15:00

Introduction

Create a light-up card featuring a Halloween Witch! Just add two LEDs, a CR2032 battery, and some Maker Tape.

There's a full-color version as well as a black & white version that makes a great coloring activity.

You can make this project (and many more!) with our Paper Circuits Kit.

This paper circuits card is a great beginner project. Just follow the steps below to make your card.
Print out the full-color card, or print out the black and white card and color/decorate as desired.
Poke holes through the front of the card for the LED legs, then push the legs through the front.
Make note of where the positive and negative legs go. Polarity matters!
On the inside of the card, bend the LED legs down flat against the paper.
Add Maker Tape and a battery to complete your circuit.
Note: If you are using thicker paper (such as cardstock) we recommend using a large safety pin to poke the holes in the paper to put the LED legs through.