Skip to main content

10.9

Major VersionM

by Pete Prodoehl

Introduction

Create a light-up Hanukkah card featuring a Menorah! Just add an LED, a CR2032 battery, and some Maker Tape.

There's a full-color version as well as a black & white version that makes a great coloring activity.

You can make this project (and many more!) with our Paper Circuits Kit.

Video Overview

Featured Document

  1. This paper circuits card is a great beginner project. Just follow the steps below to make your card. Print out the full-color card, or print out the black and white card and color/decorate as desired. Poke holes through the front of the card for the LED legs, then push the legs through the front.
    • This paper circuits card is a great beginner project. Just follow the steps below to make your card.

    • Print out the full-color card, or print out the black and white card and color/decorate as desired.

    • Poke holes through the front of the card for the LED legs, then push the legs through the front.

    • Make note of where the Positive and Negative legs go. Polarity matters!

    • On the inside of the card, bend the LED legs down flat against the paper.

    • Add Maker Tape and a Battery to complete your circuit.

    • Note: If you are using thicker paper (such as cardstock) we recommend using a large safety pin to poke the holes in the paper to put the LED legs through.

Finish Line

One other person completed this guide.

Pete Prodoehl

Member since: 03/04/2020

331 Reputation

296 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 4

All Time: 399