Introduction
Celebrate Kwanzaa with this Kinara card which features an LED for the center candle.
There's a full-color version as well as a black & white version that makes a great coloring activity.
You can make this project (and many more!) with our Paper Circuits Kit.
Parts
Video Overview
Featured Document
-
-
In general build this project in this order:
-
Print out the full-color card, or print out the black and white card, and color/decorate as desired.
-
Poke holes through front for LED legs, then push legs through front.
-
On inside of card, bend legs down flat against paper.
-
Add Maker Tape and battery to complete your circuit.
-
Cancel: I did not complete this guide.
One other person completed this guide.
Attached Documents
