Skip to main content

2.1

Major VersionM

by Pete Prodoehl

Introduction

Stencils for punching holes in paper (and felt) to combine LEGO and Paper Crafts. Below you'll find printable stencils, 3D printed files, and resources to laser cut a stencil. We also have several example projects to help get you started.

Parts

No parts specified.

Video Overview

Featured Document

  1. We've created a variety of stencils for you to get started making holes in paper (or felt) that will align with the studs on LEGO bricks.
    • We've created a variety of stencils for you to get started making holes in paper (or felt) that will align with the studs on LEGO bricks.

    • If you want the PDF file you can print just grab it from this guide. We recommend using heavy cardstock.

    • If you want the STL files for 3D printing or the SVG files for lasercutting, check out this link to our GitHub repo: https://github.com/BrownDogGadgets/Crazy...

  2. For usage we recommend placing the stencil over your paper and drawing  circles using a sharp pencil or a fine tip pen. For usage we recommend placing the stencil over your paper and drawing  circles using a sharp pencil or a fine tip pen.
    • For usage we recommend placing the stencil over your paper and drawing circles using a sharp pencil or a fine tip pen.

  3. Once you have your circles drawn on the paper you can remove the stencil and use the hole punch to make the holes.
    • Once you have your circles drawn on the paper you can remove the stencil and use the hole punch to make the holes.

  4. With the holes in place you can now attach the paper to LEGO bricks! With the holes in place you can now attach the paper to LEGO bricks!
    • With the holes in place you can now attach the paper to LEGO bricks!

  5. We built a few example projects to get the ideas flowing when you start to combine paper and LEGO!
    • We built a few example projects to get the ideas flowing when you start to combine paper and LEGO!

  6. Build a Lightning Bug with some paper wings and add a Crazy Circuits LED to light it up! Build a Lightning Bug with some paper wings and add a Crazy Circuits LED to light it up! Build a Lightning Bug with some paper wings and add a Crazy Circuits LED to light it up!
    • Build a Lightning Bug with some paper wings and add a Crazy Circuits LED to light it up!

  7. Create a Fireplace Shadowbox and add a red LED for some flame effects! Create a Fireplace Shadowbox and add a red LED for some flame effects! Create a Fireplace Shadowbox and add a red LED for some flame effects!
    • Create a Fireplace Shadowbox and add a red LED for some flame effects!

  8. Use our Blink/Fade Board to create a bracelet with lighting effects! Use our Blink/Fade Board to create a bracelet with lighting effects!
    • Use our Blink/Fade Board to create a bracelet with lighting effects!

  9. Make a light-up "Brick Bracelet" using paper, Maker Tape, and some Crazy Circuit parts!
    • Make a light-up "Brick Bracelet" using paper, Maker Tape, and some Crazy Circuit parts!

  10. Get ready for the Holidays with these light-up felt & LEGO trees! Full guide: Hole Punch Light-Up Trees Full guide: Hole Punch Light-Up Trees
  11. Make a multi-colored 4 LED light up bracelet using a piece of felt along with some LEGO bricks and Crazy Circuit parts. Make a multi-colored 4 LED light up bracelet using a piece of felt along with some LEGO bricks and Crazy Circuit parts. Make a multi-colored 4 LED light up bracelet using a piece of felt along with some LEGO bricks and Crazy Circuit parts.
    • Make a multi-colored 4 LED light up bracelet using a piece of felt along with some LEGO bricks and Crazy Circuit parts.

  12. Cute Overload! Make a new friend... a Hungry Caterpillar!
    • Cute Overload! Make a new friend... a Hungry Caterpillar!

Finish Line

One other person completed this guide.

Pete Prodoehl

Member since: 03/04/2020

331 Reputation

297 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 10

Past 30 Days: 63

All Time: 2,509