Introduction
Stencils for punching holes in paper (and felt) to combine LEGO and Paper Crafts. Below you'll find printable stencils, 3D printed files, and resources to laser cut a stencil. We also have several example projects to help get you started.
Tools
Parts
No parts specified.
Video Overview
Featured Document
-
-
We've created a variety of stencils for you to get started making holes in paper (or felt) that will align with the studs on LEGO bricks.
-
If you want the PDF file you can print just grab it from this guide. We recommend using heavy cardstock.
-
If you want the STL files for 3D printing or the SVG files for lasercutting, check out this link to our GitHub repo: https://github.com/BrownDogGadgets/Crazy...
-
-
-
For usage we recommend placing the stencil over your paper and drawing circles using a sharp pencil or a fine tip pen.
-
-
-
Once you have your circles drawn on the paper you can remove the stencil and use the hole punch to make the holes.
-
-
-
With the holes in place you can now attach the paper to LEGO bricks!
-
-
-
We built a few example projects to get the ideas flowing when you start to combine paper and LEGO!
-
-
-
Build a Lightning Bug with some paper wings and add a Crazy Circuits LED to light it up!
-
-
-
Create a Fireplace Shadowbox and add a red LED for some flame effects!
-
-
-
Use our Blink/Fade Board to create a bracelet with lighting effects!
-
-
-
Make a light-up "Brick Bracelet" using paper, Maker Tape, and some Crazy Circuit parts!
-
-
-
Get ready for the Holidays with these light-up felt & LEGO trees!
-
Full guide: Hole Punch Light-Up Trees
-
-
-
Make a multi-colored 4 LED light up bracelet using a piece of felt along with some LEGO bricks and Crazy Circuit parts.
-
-
-
Cute Overload! Make a new friend... a Hungry Caterpillar!
-
Cancel: I did not complete this guide.
One other person completed this guide.
Attached Documents
