Introduction
This technique allow you to operate a Crazy Circuits Slide Switch with a simple LEGO based mechanism.
Video Overview
-
-
Gather your parts up.
-
These are the basic parts needed for this technique, but you'll also need something to put it on.
-
-
-
Connect the #2 Axel Connector to the Vertical Pin.
-
Connect the Perpendicular Axel to one end.
-
-
-
Plug your Axle into the other side.
-
Attach a Technicals Ball for added ease of use.
-
-
-
Attach the Perpendicular Connector to the top of your switch.
-
You'll need to put the Vertical Pin on top of a LEGO plate to get spacing correct with the Switch.
-
You can use longer Axle pieces to extend this technique further.
-
Cancel: I did not complete this guide.
One other person completed this guide.
