Introduction
Make and customize your own Light-Up Black Cat Mask with this template. This guide is an overview of this design. For a more detailed circuit tutorial, see the Light-Up Spider Mask Guide.
If you like this mask, check out these other designs:
You can make this project (and many more!) with our Paper Circuits Kit.
Video Overview
Featured Document
-
-
Print out the Cat-Eyed Mask Template.
-
Note: You don't *NEED* the embellishments sheet, but you could use the ears on it if you would prefer paper ears instead of using pipe cleaners.
-
This guide is an overview of this design. For a more detailed circuit tutorial, see the Light-Up Spider Mask Guide.
-
-
-
Use a glue stick to glue the template to the back of a piece of glitter paper, then cut it out.
-
Follow the template to build your circuit.
-
-
-
Use hot glue to glue pipe cleaners around the perimeter of the mask on the front and the back. Look for the extra-fuzzy variety that is about twice the width of a normal pipe cleaner.
-
Use the eye template to cut the eyes out of a contrasting texture of black paper or other matte material.
-
Glue the eyes in place.
-
-
-
Make two triangles with another piece of pipe cleaner to make the ears and glue them in place.
-
-
-
Wrap pipe cleaners around a wooden dowel, then glue the dowel to the back for a masquerade style handheld mask.
-
-
-
Hold the mask to your face and become a cat!
-
Attached Documents
