1.0

Major VersionM

by Pete Prodoehl

Light-Up Glasses - Easter Bunny

Written By: Natasha Dzurny (and one other contributor)
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

5

Time Required

00:15:00 - 00:35:00

Sections

1

Flags

0

Introduction

Make light-up glasses that look like the Easter Bunny! Just add two LEDs, a CR2032 battery, and some Maker Tape.

You can make this project (and many more!) with our Paper Circuits Kit.

Featured Document

  1. Print the template above.

    • Print the template above.

    • To complete the circuit, follow the instructions on the template and in the main Light-Up Glasses Guide.

  2. Use acrylic paint to paint the glasses. Add glitter before the paint dries if desired. Add glitter before the paint dries if desired.

    • Use acrylic paint to paint the glasses.

    • Add glitter before the paint dries if desired.

  3. Use the lens template to cut the lenses from colored acetate. Use hot glue to glue them to the back of the frames. Use hot glue to glue them to the back of the frames.

    • Use the lens template to cut the lenses from colored acetate.

    • Use hot glue to glue them to the back of the frames.

  4. Color and cut out the ears. We added glitter to the ears with some Elmer's Glue. (optional)

    • Color and cut out the ears.

    • We added glitter to the ears with some Elmer's Glue. (optional)

  5. Glue the ears to the frames and wear your glasses.

    • Glue the ears to the frames and wear your glasses.

    • Have a rosy day!

Finish Line

Author

with 1 other contributor

Natasha Dzurny

Member since: 08/26/2019

4,201 Reputation

74 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 2