Introduction
Make these cool light-up shades that look like shutters. Just add two LEDs, a CR2032 battery, and some Maker Tape.
You can make this project (and many more!) with our Paper Circuits Kit.
Featured Document
-
-
Choose a frame shape and print the template above.
-
Note: The Shudder Shades are particularly tricky to cut out and the foil makes it even harder, so only advanced makers should try this one!
-
-
-
Use a glue stick to glue a sheet of aluminum foil to the cardboard.
-
-
-
Use the aluminum-covered piece to make the front of the frames.
-
Follow the template instructions in the main Light-Up Glasses Guide to complete the circuit.
-
Almost done!
Finish Line
Attached Documents
