10.1

Major VersionM

by Pete Prodoehl

Mother's Day Flower Card

Written By: Pete Prodoehl (and one other contributor)
  • Comments: 0
  • Favorites: 0
  • Completions: 1

Difficulty

Very easy

Steps

1

Time Required

00:10:00 - 00:15:00

Sections

1

Flags

0

Introduction

Create a fun light-up card for Mother's Day. Just add an LED, a CR2032 battery, and some Maker Tape.

You can make this project (and many more!) with our Paper Circuits Kit.

Video Overview

Featured Document

  1. In general build this project in this order: Print out the full-color card, or print out the black and white card, and color/decorate as desired. Poke holes through front for LED legs, then push legs through front.

    • In general build this project in this order:

    • Print out the full-color card, or print out the black and white card, and color/decorate as desired.

    • Poke holes through front for LED legs, then push legs through front.

    • On inside of card, bend legs down flat against paper.

    • Add Maker Tape and battery to complete your circuit.

    • Note: If you are using thicker paper (such as cardstock) we recommend using a large safety pin to poke the holes in the paper to put the LED legs through.

Conclusion

Enjoy your card!

One other person completed this guide.

Author

with 1 other contributor

Pete Prodoehl

Member since: 03/04/2020

331 Reputation

279 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 5

Past 30 Days: 14

All Time: 390