10.1

Major VersionM

by Pete Prodoehl

Picture You and Me Together Valentine's Card

Written By: Pete Prodoehl (and one other contributor)
  • Comments: 0
  • Favorites: 0

Difficulty

Very easy

Steps

1

Time Required

00:10:00 - 00:15:00

Sections

1

Flags

0

Introduction

Create a fun light-up card for Valentine's Day. Just add an LED, a CR2032 battery, and some Maker Tape.

Video Overview

Featured Document

  1. In general build this project in this order: Print out the full-color card, or print out the black and white card, and color/decorate as desired.

    • In general build this project in this order:

    • Print out the full-color card, or print out the black and white card, and color/decorate as desired.

    • Poke holes through front for LED legs, then push legs through front.

    • On inside of card, bend legs down flat against paper.

    • Add Maker Tape and battery to complete your circuit.

    • Note: If you are using thicker paper (such as cardstock) we recommend using a large safety pin to poke the holes in the paper to put the LED legs through.

Conclusion

Enjoy your card!

Author

with 1 other contributor

Pete Prodoehl

Member since: 03/04/2020

331 Reputation

289 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 290