Introduction
Create fun light up Star Wars characters using these free Robot Buddies Skins! First, print off the Robot Buddies body template, wire it up with LEDs and/or a motor, and add your skin! Depending on how you want to make your project you may wish to shrink some of these heads down a bit.
Featured Document
-
-
Shrink down the heads if you want to draw bodies.
-
Cut, fold, draw, add conductive tape, and THEN close it up. If you do things right you should only need two small pieces of tape on the bottom flaps to hold it all together.
-
You can use 2 LEDs as well as a motor at the same time, but you can use any combination of these parts.
-
Almost done!
Finish Line
Attached Documents
