Introduction
If you don't have the money to buy an ACTUAL Tesla CyberTruck you can try your hand at making your own. This paper craft can use either LEDs or a vibrating motor to add effects.
Video Overview
Featured Document
-
-
Print on Card stock. Cut all the bold lines first.
-
The use a straight edge to fold all the dotted lines.
-
Color it. Colored Pencil works quite well.
-
Use some Maker Tape to add a motor or LED to it. If you want, cut a slit in the front of the Cyber Truck for headlights.
-
Use a couple pieces of clear tape to hold everything together on the bottom.
-
In general this project requires a lot of cutting and folding, more than anything else we've designed up. Take your time and cut carefully.
-
Almost done!
Finish Line
Attached Documents
