Skip to main content

10.1

Major VersionM

by Pete Prodoehl

Introduction

Create your own light up Mother's Day card using an LED, battery, and conductive tape. This card features an adorable Baby Yoda, only takes minutes to make, and is activated by a paper switch.

Featured Document

  1. In general build this project in this order: Color or decorate your card, poke LED legs through the paper, add tape and battery, and you're all set! Note: If you are using thicker paper (such as cardstock) we recommend using a large safety pin to poke the holes in the paper to put the LED legs through. Note: If you are using thicker paper (such as cardstock) we recommend using a large safety pin to poke the holes in the paper to put the LED legs through.
    • In general build this project in this order: Color or decorate your card, poke LED legs through the paper, add tape and battery, and you're all set!

    • Note: If you are using thicker paper (such as cardstock) we recommend using a large safety pin to poke the holes in the paper to put the LED legs through.

Finish Line

One other person completed this guide.

Attached Documents

Pete Prodoehl

Member since: 03/04/2020

281 Reputation

276 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 4

All Time: 522