Introduction
Make your own light-up paper circuits Bear project using an LED, a CR2032 battery, and some Maker Tape.
You can make this project (and many more!) with our Paper Circuits Kit.
Tools
Optional Tools
Parts
Featured Document
-
-
This paper circuits postcard is a great beginner project. Just follow the steps below to make your Bear.
-
Print out the template and color/decorate as desired.
-
Poke holes through the front of the card for the LED legs, then push the legs through the front.
-
Make note of where the Positive and Negative legs go. Polarity matters!
-
On the back of the project, bend the LED legs down flat against the paper.
-
Add Maker Tape and a Battery to complete your circuit.
-
Note: If you are using thicker paper (such as cardstock) we recommend using a large safety pin or push pin to poke the holes in the paper to put the LED legs through.
-
-
-
Check out these Animal Friends paper circuits projects and more. Make yourself an animal posse!
-
Attached Documents
