Skip to main content

1.0

Major VersionM

by Pete Prodoehl

Introduction

A replacement box latch in case you lose one from the boxes our Crazy Circuits Kits come in.

Parts

No parts specified.

  1. You can download the file and print it on your own 3D Printer. Find it in our GitHub repository: https://github.com/BrownDogGadgets/3D-Pr... You can also find it on Printables: https://www.printables.com/model/450146-...
  2. Every 3D printer is a little different! If your part doesn't fit properly here are a few things to try. Part too tight? Try sanding it or cutting away some material with a knife. Part too loose? Add some tape as a shim.
    • Every 3D printer is a little different! If your part doesn't fit properly here are a few things to try.

    • Part too tight? Try sanding it or cutting away some material with a knife.

    • Part too loose? Add some tape as a shim.

    • You can also try printing it at slightly more or less than 100% scale.

    • Special thanks to Dan Riles for sending us the file he create so we could share it!

Finish Line

Pete Prodoehl

Member since: 03/04/2020

331 Reputation

280 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 82