10.4

Major VersionM

by Amanda Etim

Day 08 micro:bit Classroom Curriculum

Written By: Andy Wallus (and 3 other contributors)
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

3

Time Required

00:40:00 - 01:00:00

Sections

1

Flags

0

Introduction

Curriculum for use with the Crazy Circuits Bit Board Classroom Set - Making things move with servos and

micro:bit

Featured Document

  1. This is the final code for the Servo Sweep activity. The servo is connected to Pin 0. The servo is connected to Pin 0.

    • This is the final code for the Servo Sweep activity.

    • The servo is connected to Pin 0.

  2. This is the final code for the Servo Sweep Between Two Angles.

    • This is the final code for the Servo Sweep Between Two Angles.

  3. This is the final code for the Motion Triggered Motion activity.

    • This is the final code for the Motion Triggered Motion activity.

Finish Line

Author

with 3 other contributors

Andy Wallus

Member since: 10/18/18

13,136 Reputation

140 Guides authored

0 Comments

Add Comment



View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 380