Introduction
A 3D Printed LEGO Technic Compatible mount for a Distance Sensor. This is used in the Bit Board Rover Kit. We are sharing the file in case you want to print your own.
Tools
Parts
No parts specified.
-
-
You can download the file and print it on your own 3D Printer.
-
Find it in our GitHub repository: https://github.com/BrownDogGadgets/3D-Pr...
-
This file will work with our Distance Sensor.
-
-
-
The Distance Sensor slides into the holder and is held in place by gravity.
-
Part too tight? Try sanding it or cutting away some material with a knife.
-
Part too loose? Try adding tape as a shim.
-
You can also try printing it at slightly more or less than 100% scale.
-
Almost done!
Finish Line
