Skip to main content

1.1

Major VersionM

by Pete Prodoehl

Introduction

A 3D Printed LEGO Compatible part.

  1. You can download the file and print it on your own 3D Printer.
  2. Note: We designed this so we could add Crazy Circuits LEDs to the bottom on LEGO projects.
    • Note: We designed this so we could add Crazy Circuits LEDs to the bottom on LEGO projects.

    • Tip: If the file does not have a tight fit you can try to print it a bit more than 100% scale. Try it at 101%, if it is still loose, increase to 102%, and so on.

Finish Line

One other person completed this guide.

Pete Prodoehl

Member since: 03/04/2020

331 Reputation

297 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 7

All Time: 221