Skip to main content

1.2

Major VersionM

by Pete Prodoehl

Introduction

A 3D Printed LEGO Compatible mount for a GoPro Camera.

Parts

No parts specified.

  1. You can download the file and print it on your own 3D Printer.
    • You can download the file and print it on your own 3D Printer.

    • Find it in our GitHub repository: https://github.com/BrownDogGadgets/3D-Pr...

    • This file will work with a GoPro HERO3 or any GoPro camera that is the same dimensions as a GoPro HERO3.

  2. The GoPro sits inside the holder loosely. If you want a more secure fit you can add some tape to hold the camera into place.
    • The GoPro sits inside the holder loosely. If you want a more secure fit you can add some tape to hold the camera into place.

    • Every 3D printer is a little different! If your part doesn't fit on a baseplate here are a few things to try.

    • Part too tight? Try sanding it or cutting away some material with a knife.

    • Part too loose? Add two LEGO bricks on opposite sides of the part.

    • You can also try printing it at slightly more or less than 100% scale.

Finish Line

Pete Prodoehl

Member since: 03/04/2020

281 Reputation

276 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 87