Introduction
A 3D Printed NeoPixel Beam Holder allows you to attach an Addressable RGB LED Strip (commonly referred to as a "NeoPixel Strip") using LEGO Technic Pins.
Note: We designed a variation of this part for our Rover Kit. See the Rover NeoPixel Beam Holder if you want a slightly different version of this one. (It has mounting holes on two sides for more versatility.)
Tools
Parts
No parts specified.
-
-
You can download the file and print it on your own 3D Printer.
-
Find it in our GitHub repository: https://github.com/BrownDogGadgets/3D-Pr...
-
There are two versions, one that mounts the NeoPixel Strip on the top and one that mounts it on the side.
-
You'll need two 3mm pan head screws. They should be between 6mm long and 10mm long.
-
-
-
Every 3D printer is a little different! If your part doesn't fit properly here are a few things to try.
-
Part too tight? Try sanding it or cutting away some material with a knife.
-
Part too loose? Add some tape to act as a shim.
-
You can also try printing it at slightly more or less than 100% scale.
-
