Introduction
Use these easy to make Paper Circuits Cubes to demonstrate the basics of circuitry. Learn about open and closed circuits, polarity, power and components.
Besides our Paper Circuits Kit (which contains Maker Tape, batteries, and LEDs) you'll need a few magnets, washers, and tape.
Featured Document
-
-
If you haven't built any cubes yet make sure to check out the guide for Paper Circuits Cubes first.
-
Use this cube with any generic component you want to use with your other cubes. Small motors, fans, buzzers, or anything else.
-
There are two versions, with a larger version for larger components that don't fit between the Maker Tape that runs across the top.
-
Reminder: Assemble the cube before you apply the Maker Tape as it needs to wrap around all sides of the completed cube.
-
-
-
With the Component Cube you can experiment with other components besides the standard LEDs, Batteries, and Switches.
-
Try adding a Switch Cube between your power and your LEDs.
-