Skip to main content

1.0

Major VersionM

by Pete Prodoehl

Introduction

Use these easy to make Paper Circuits Cubes to demonstrate the basics of circuitry. Learn about open and closed circuits, polarity, power and components.

Besides our Paper Circuits Kit (which contains Maker Tape, batteries, and LEDs) you'll need a few magnets, washers, and tape.

Featured Document

  1. If you haven't built any cubes yet make sure to check out the guide for Paper Circuits Cubes first. Use this cube along with a standard LED.
    • If you haven't built any cubes yet make sure to check out the guide for Paper Circuits Cubes first.

    • Use this cube along with a standard LED.

    • Reminder: Assemble the cube before you apply the Maker Tape.

  2. Add a Battery Cube to power your LED. Remember that polarity matters! If your LED does not light up try turning it 180 degrees relative to the Battery Cube.
    • Add a Battery Cube to power your LED.

    • Remember that polarity matters! If your LED does not light up try turning it 180 degrees relative to the Battery Cube.

    • For more fun add a Lever Switch Cube between the LED and the Battery.

Finish Line

Attached Documents

Pete Prodoehl

Member since: 03/04/2020

331 Reputation

287 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 7

Past 7 Days: 30

Past 30 Days: 123

All Time: 351