Introduction
Use these easy to make Paper Circuits Cubes to demonstrate the basics of circuitry. Learn about open and closed circuits, polarity, power and components.
Besides our Paper Circuits Kit (which contains Maker Tape, batteries, and LEDs) you'll need a few magnets, washers, and tape.
Featured Document
-
-
If you haven't built any cubes yet make sure to check out the guide for Paper Circuits Cubes first.
-
Use this cube along with a standard LED.
-
Reminder: Assemble the cube before you apply the Maker Tape.
-
-
-
Add a Battery Cube to power your LED.
-
Remember that polarity matters! If your LED does not light up try turning it 180 degrees relative to the Battery Cube.
-
For more fun add a Lever Switch Cube between the LED and the Battery.
-
Almost done!
Finish Line
Attached Documents
