Skip to main content

1.1

Major VersionM

by Pete Prodoehl

Introduction

The files you find here can be used to print (or laser cut) your own Light Sensor Bar.

(We recommend 6mm acrylic for the laser cut version but if you only have 3mm thick acrylic you can cut two pieces and stack them.)

Parts

No parts specified.

  1. You can download the file and print it on your own 3D Printer. Find the file Rover-Light-Sensors-Bar-3D.stl in our GitHub repository: https://github.com/BrownDogGadgets/3D-Pr... Find the file Rover-Light-Sensors-Bar-3D.stl in our GitHub repository: https://github.com/BrownDogGadgets/3D-Pr...
  2. We've also got a laser cut version of the file. You can cut from 6mm material or two pieces of 3mm material that you stack after cutting. Find the file Rover-Light-Sensors-Bar-LC.svg in our GitHub repository: https://github.com/BrownDogGadgets/3D-Pr...
    • We've also got a laser cut version of the file. You can cut from 6mm material or two pieces of 3mm material that you stack after cutting.

    • Find the file Rover-Light-Sensors-Bar-LC.svg in our GitHub repository: https://github.com/BrownDogGadgets/3D-Pr...

Finish Line

Pete Prodoehl

Member since: 03/04/2020

331 Reputation

279 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 52