Introduction
What is happening in this scene? Create your own story with this paper circuit postcard and make it light up with an LED, CR2032 battery, and Maker Tape.
There's a full-color version as well as a black & white version that makes a great coloring activity.
You can make this project (and many more!) with our Paper Circuits Kit.
Tools
Optional Tools
Parts
Featured Document
-
-
Print out the full-color card, or print out the black and white card and create your scene as desired. Let your imagination run wild! What is happening in this scene? What is illuminated?
-
Poke holes through the front of the card for the LED legs, then push the legs through the front.
-
Make note of where the Positive and Negative legs go. Polarity matters!
-
On the back of the project, bend the LED legs down flat against the paper.
-
Add Maker Tape and a Battery to complete your circuit and your scene.
-
Note: If you are using thicker paper (such as cardstock) we recommend using a large safety pin or push pin to poke the holes in the paper to put the LED legs through.
-
-
-
Use this Story Starter as a springboard for a creative writing exercise.
-
-
-
Check out all the other Story Starters paper circuits projects and make more scenes come to life!
-
Attached Documents
