1.1

Major VersionM

by Pete Prodoehl

Voltmeter Holder

Written By: Pete Prodoehl
  • Comments: 0
  • Favorites: 0

Difficulty

Very easy

Steps

2

Time Required

00:01:00 - 00:05:00

Sections

1

Flags

0

Introduction

This is a desktop holder for the analog voltmeter we use in some of our kits.

Tools

Parts

No parts specified.

  1. You can download the file and print it on your own 3D Printer. Find it in our GitHub repository: https://github.com/BrownDogGadgets/3D-Pr... You can also find it on Printables: https://www.printables.com/model/1543637...

  2. There are holes on the base that allow you to attach it to LEGO Technic Beams using LEGO Technic Pins. The holes can also be used to attach the mount to surfaces using screws, zipe ties, or wire ties. To permanently hold the Voltmeter in place you can add a piece of double-sided foam tape (or a dab of hot glue) behind it.

    • There are holes on the base that allow you to attach it to LEGO Technic Beams using LEGO Technic Pins.

    • The holes can also be used to attach the mount to surfaces using screws, zipe ties, or wire ties.

    • To permanently hold the Voltmeter in place you can add a piece of double-sided foam tape (or a dab of hot glue) behind it.

Finish Line

Author

Pete Prodoehl

Member since: 3/4/20

1,940 Reputation

434 Guides authored

0 Comments

Add Comment



View Statistics:

Past 24 Hours: 1

Past 7 Days: 10

Past 30 Days: 10

All Time: 10