Skip to main content

1.0

Major VersionM

by Pete Prodoehl

Introduction

A "game controller" style 3D Printed part to hold a micro:bit and the battery pack that comes with it.

Parts

No parts specified.

  1. You can download the file and print it on your own 3D Printer. Find it in our GitHub repository: https://github.com/BrownDogGadgets/3D-Pr...
  2. We found this a nice solution for our Rover Simple Remote instead of trying to hold both parts in your hands. Every 3D printer is a little different! If your part doesn't fit properly here are a few things to try. Part too tight? Try sanding it or cutting away some material with a knife.
    • We found this a nice solution for our Rover Simple Remote instead of trying to hold both parts in your hands.

    • Every 3D printer is a little different! If your part doesn't fit properly here are a few things to try.

    • Part too tight? Try sanding it or cutting away some material with a knife.

    • Part too loose? Add a piece of paper or tape as a shim.

    • You can also try printing it at slightly more or less than 100% scale.

    • For Advanced Users: You can edit the OpenSCAD file to make changes and then render and export a new STL file.

Finish Line

Pete Prodoehl

Member since: 03/04/2020

281 Reputation

278 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 13

All Time: 364