Skip to main content

1.0

Major VersionM

by Pete Prodoehl

Introduction

A 3D Printed LEGO Technic Compatible mount for a 3AAA Battery Holder.

Note: If you need a battery pack for the Rover we recommend the 2AA Battery Holder with Holes. If you need one for the Rover Remote we recommend the 2AAA Battery Holder with Holes.

Parts

No parts specified.

  1. You can download the file and print it on your own 3D Printer.
  2. The battery pack sits inside the holder loosely. If you want a more secure fit you can add some tape to hold the battery pack in place. Every 3D printer is a little different! If your part doesn't fit properly here are a few things to try.
    • The battery pack sits inside the holder loosely. If you want a more secure fit you can add some tape to hold the battery pack in place.

    • Every 3D printer is a little different! If your part doesn't fit properly here are a few things to try.

    • Part too tight? Try sanding it or cutting away some material with a knife.

    • Part too loose? Add some tape to act as a shim.

    • You can also try printing it at slightly more or less than 100% scale.

Finish Line

Pete Prodoehl

Member since: 03/04/2020

340 Reputation

298 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 91