Introduction
A 3D Printed LEGO Compatible mount for a Distance Sensor.
Tools
Parts
No parts specified.
-
-
You can download the file and print it on your own 3D Printer.
-
Find it in our GitHub repository: https://github.com/BrownDogGadgets/3D-Pr...
-
This file will work with our Distance Sensor.
-
-
-
The Distance Sensor slides into the holder and is held in place by gravity.
-
Every 3D printer is a little different! If your part doesn't fit on a baseplate here are a few things to try.
-
Part too tight? Try sanding it or cutting away some material with a knife.
-
Part too loose? Add two LEGO bricks on opposite sides of the part.
-
You can also try printing it at slightly more or less than 100% scale.
-
Cancel: I did not complete this guide.
One other person completed this guide.