Introduction
Use these easy to make Paper Circuits Cubes to demonstrate the basics of circuitry. Learn about open and closed circuits, polarity, power and components.
Besides our Paper Circuits Kit (which contains Maker Tape, batteries, and LEDs) you'll need a few magnets, washers, and tape.
Featured Document
-
-
If you haven't built any cubes yet make sure to check out the guide for Paper Circuits Cubes first.
-
Use this cube as an on/off switch between a power cube and output cube, such as an LED.
-
This is the same switch from our Switch - Lever Switch guide.
-
Reminder: Assemble the cube before you apply the Maker Tape as it needs to wrap around multiple sides of the completed cube.
-
-
-
With the Lever Switch Cube you can control when your circuit is providing power.
-
Just add the Level Switch Cube between your power source and any component that needs power to operate.
-
Attached Documents
