Introduction
A 3D Printed Tape Roll Holder for our 1/8" Wide, 5 Meter Roll of Maker Tape.
Our 1/8" Maker Tape is used as part of our Crazy Circuits brick-based electronics system.
Check out all of our Tape Roll Holders:
Tools
Parts
-
-
You can download the files and print them on your own 3D Printer.
-
Find the files in our GitHub repository: https://github.com/BrownDogGadgets/3D-Pr...
-
You can also find the files on Printables: https://www.printables.com/model/232952-...
-
-
-
If you don't want to print in two colors just print the body and four clips as you normally would. (But the "BDG" lettering is there if you want to add it.)
-
You'll have the best results if you print the BDG lettering in a darker color, such as black.
-
Find the files in our GitHub repository: https://github.com/BrownDogGadgets/3D-Pr...
-
Or grab them from Printables: https://www.printables.com/model/232952-...
-
